| $34.50 | Product Number tam70162 |
Twin-motor gearbox. Crank-axle gearbox. Remote control box. Ball caster. Tires. Universal arm (170mm x 8pcs.). Universal plate (160 x 60mm). 3mm push rivet (10mm & 8mm length x 24pcs.). Other required parts are included. This kit provides parts wheeled remote control robot. Clear smoke colored remote control box has 4
channels and enables control of 4 different movements by adding separately
available gearboxes. This robot can grab onto and lift objects.
| $62.00 |
Product Number tam75020 |
You can paint or design your own style the Snail's plastic body.. The 21st century is said to be the age of robotics.
explores this new trend with the release of an assembly robot snail. The
Line Tracing Snail uses a special LED sensor to detect a black line (magic
marker, etc.) drawn on a white background. It uses two small motors and
rubber tires to slowly but surely move forward and turn. The body of the
snail is made of transparent (HIPS) plastic to allow viewing
| $72.00 |
Product Number owiowi-9874 |
This
is designed for experimenters with limited experience in assembling mechanical
kits. Built with durable transparent red plastic body parts, a pre-soldered
electronic circuit board and motor. This 4-n-1 robot is controlled by a
condenser microphone and printed circuit board. It has a built-in sensor, which
reacts to vibration from sound. It moves when it senses a high pitched noise,
such as a clap or a voice. The slide switch controls its forward or backward
movement.
| $34.70 |
Product Number tam70119 |
The
Amphibious Vehicle utilizes a combination of wheel and propeller power to
move itself both on land and while floating on water. The FA-130 Underwater
Motor powers both the rear wheels and the propeller. Styrofoam floats keep
the vehicle stable on top of the water while the adjustable rudder steers
the vehicle in water.| $61.00 | Product Number owiowi-7769 |
This
is designed for experimenters with limited experience in assembling
mechanical kits. Built with durable transparent purple plastic body parts, a
pre-soldered electronic circuit board and motor. Moves like a live animal
via turning and stopping motors on its right and left sides. Built-in sensor
which reacts to vibration from sound or physical contact. It naturally moves
forward, but changes course when it senses a high pitched noise (clap or
voice) or an obstacle.
| $28.15 |
Product Number tam71106 |
Gearbox, motor, reverse switch. The rotating motor has power that is transferred to the legs via crank plates to make the Turtle crawl. Each pair of legs (front and rear) are
moulded
as one piece and front leg plate is attached with a ball joint that serves
as a fulcrum to realistically imitate turtle crawling. Legs and body on
which the gearbox is mounted employ transparent-colored parts, giving the
turtle a funky look. Reverse switch is also transparent.| $20.60 |
Product Number tam70154 |
Submarine
motor comes with boat hull. Suction cup is supplied for easy attachment to
boat. Rudder can be set for auto-steering. Polystyrene boat can be easily
modified and painted.
| $20.40 |
Product Number mid54202 |
How
can a mousetrap power a vehicle? What is friction and how can it be managed?
How is energy stored? How is speed calculated? You can ''Build the Answers''
with mousetrap racing. You can also learn faster and retain more with
hands-on activities that challenge the senses. Designed, manufactured and
refined based on years of classroom testing and teacher input. Use the
mousetrap racer as a hands-on supplement to teach power and transportation.
You can also custom paint .| $16.40 |
Product Number tam70153 |
FA-130
Motor. Suction cup. Rudder. One sided tape. Plastic disk (for sticking
suction cup onto). Screws . The Submarine Motor features a suction cup
(123mm diameter), which can be attached to containers, such as plastic
bottles or under the hulls of watercraft models. Rudder can be set for
auto-steering.
| $14.05 |
Product Number tam70157 |
Shaft
Mounts; Four(4) . Angle Brackets; Four(4) . Universal Plates; Two (2). Shaft
mounts; Four (4). Angle Brackets; Four (4). Rivet Sets; 24. Universal Plates
can be used in many projects. The universal plates are 160X60mm. This set
can be used as frame or chassis for various constructions. 3mm holes are
spaced 5mm apart.
| $9.35 |
Product Number mid3953 |
Rubber band powered. 1/8'' thick, laser cut balsa parts. Pre-cut wood dowels. Can be decorated with acrylic paints, colored markers or stickers. Illustrated assembly guide. Suitable for Ages 8 &
up.| $27.65 |
Product Number dfx1710 |
Easy-to-wind
and snag-free string release system eliminates tangles and snags for
increased performance Pre-cut and drilled balsa wood frame Uses lightweight
low inertia DVD/CD layers for wheels Travels distances from 15 to 30 meters
(49 to 98 feet) Can be assembled in less than 30 minutes for most first time
builders. Two Pre-Drilled Balsa Wood Side Rails (8x1/2x1/4''). Two Brass
Tubing Axles (6x3/16''). One Brass Tubing Lever Arm (6x1/8''). Four DVD
Wheels.
| $42.00 |
Product Number dfx1712 |
Easy-to-wind
and snag-free string release system eliminates tangles and snags for
increased performance Pre-cut and drilled balsa wood frame Uses lightweight
low inertia DVD/CD layers for wheels Travels distances from 25 to 45 meters
(82 to 147 feet) Can be assembled in less than 30 minutes for most first
time builders.
| $48.70 |
Product Number dfx1714 |
Easy-to-wind and snag-free string release system eliminates tangles and snags
for increased performance Pre-cut and drilled balsa wood frame Uses lightweight
low inertia DVD/CD layers for wheels Travels distances from 35 to 65 meters (82
to 147 feet) Reduced friction bushings increase the model's efficiency
Adjustable steering allows the model to travel in complete circles of almost any
radius (can also be set to travel in a straight line)
| $42.00 |
Product Number dfx1716 |
Easy-to-wind
and snag-free string release system eliminates tangles and snags for
increased performance Pre-cut and drilled balsa wood frame Uses lightweight
low inertia DVD/CD layers for wheels Carries a full soda can from 15 to 20
meters (49' to50') High torque gearing system generates tremendous torque
and power capable of moving large loads over great distances Special cargo
bay designed to hold a soda can or similar item Can be assembled in less
than 30 minutes| $44.00 |
Product Number dfx1718 |
Easy-to-wind
and snag-free string release system eliminates tangles and snags for
increased performance Pre-cut and drilled balsa wood frame Uses lightweight
low inertia DVD/CD layers for wheels Travels distances from 40 to 80 meters
(131 to 262 feet) Twin mousetrap design for twice the power Can be assembled
in less than 30 minutes for most first time builders.
| $33.70 |
Product Number dfx1720 |
Easy-to-wind
and snag-free string release system eliminates tangles and snags for
increased performance Uses lightweight low inertia DVD/CD layers for wheels.
One balsa wood strips (18'' x 3 x 3/16''). Two brass tubing axles (6 x
3/16''). One brass tubing lever arm (12'' x 1/8''). Four CD/DVD wheels. One
balsa wood strips (12'' x 3 x 3/16''). Eight rubber DVD/CD spacers. Four
metal thrust washers. One Victor mousetrap. Three zip lock axle hook. 36''
Kevlar string.
| $44.00 |
Product Number dfx1722 |
Rubber
band
powered racer Travels 5 meters in 1 second Pre-cut and pre-drilled parts
Uses the pulley system to stretch the rubber band instead of winding it like
other vehicles. Two 11 1/4 x 1 1/8 x 1/8'' balsa wood (side rails). Two 2
1/2 x 1 1/4 x 1/8'' balsa wood (rear wing sides). One 7 1/2 x 1 1/4 x 1/8''
balsa wood (deck board). One 1 7/8 x 1/4'' brass tube (pulley axle shaft).
Four #8 SAE metal washers (thrust bearings). One 3 1/2 x 5/32 brass tube
(rear axle shaft).
| $38.70 |
Product Number dfx1724 |
Balsa
wood construction Twin rubber band powered propeller design (one for lift
and one for thrust) Works on smooth floors as well as carpeted floors
Designed to travel a distance of 5 meters (16 feet) Assembly time is between
one and two hours for most builders.
| $200.00 |
Product Number ebm859901e |
Build 3-dimensional toy models with
moulded plastic parts and bendable steel parts which utilize the new screw/pin system for quick model building. In addition to building an interactive robot, you'll build a trike motorcycle and a futuristic crane. A battery operated power tool becomes the motor to provide motion to the finished models. Use the USB cord to download music and movements for the robot! Rubber tires. Full
colour, illustrated assembly guide.
| $21.70 |
Product Number mid37302 |
Our twin hull Tech Cat Catamaran will put seaworthy success into your earth science and technology curriculum. Quick to construct and fun to run, the Tech-Cat Catamaran has three different power sources - sail, airboat and surface drive for
you to analyse. Discovering the concepts of floatation, thrust, velocity, torque and many others was never so much
fun.| $22.70 |
Product Number mid37402 |
The
Hydro racer is designed for racing fun! The sleek design is easy to assemble and
assures good racing performance with lots of opportunities for experimenting.
This kit features pre-cut wood components that self-align during assembly.
Includes foam pontoons, electric motor, plastic prop and requires no soldering!
Easy to decorate with acrylic paints
| $9.20 |
Product Number mid3950 |
Rubber
band powered. 1/8'' thick, laser cut balsa main body. 1/2'' thick, styrofoam
hull. Black plastic propeller. Can be decorated with acrylic paints, colored
markers or stickers. Illustrated assembly guide.
| $9.20 |
Product Number mid3951 |
Rubber
band powered. 1/8'' thick, laser cut balsa fuselage. Pre-cut white foam
wings and wing fins. Yellow plastic propeller. Can be decorated with acrylic
paints, colored markers or stickers. Illustrated assembly guide.
| $9.20 |
Product Number mid3952 |
Rubber
band powered. 1/8'' thick, laser cut balsa fuselage. Pre-cut white foam
wings and wing fins. Yellow plastic propeller. Can be decorated with acrylic
paints, colored markers or stickers. Illustrated assembly guide.
| $9.20 |
Product Number mid3954 |
Rubber
band powered. 1/8'' thick, laser cut balsa fuselage. 1/32'' thick balsa fins.
Yellow plastic propeller. Metallic foil streamer. Can be decorated with acrylic
paints, colored markers or stickers. Illustrated assembly guide.| $9.20 |
Product Number mid3955 |
Rubber band powered. 1/8'' thick, laser cut balsa parts. Pre-cut wood dowels. Can be decorated with acrylic paints, colored markers or stickers. Illustrated assembly guide.
| $19.50 |
Product Number mid50102 |
The big brother to our Shoebox R.O.G., Right Flyer has cambered airfoil wings
and a low thrust line for high performance.
| $16.20 |
Product Number mid50202 |
The
Flip Glider features wing tip dihedral for stability, and airfoil that you can
sand to shape for optimal lift. This kit may be easily converted to an outdoor
catapult launched
| $18.50 |
Product Number mid50902 |
Great for outdoor flying with longer flight duration, stronger framing, movable / removable wing for
centre
of gravity experiments.
| $9.50 |
Product Number mid51002 |
Still
the best model for first time builders; our Delta Dart can now be built using
glue sticks in conjunction with white glue for a faster, easier and cleaner
project.
| $19.20 |
Product Number mid51402 |
The
Shoebox R.O.G is a rubber powered flying laboratory designed to make long
duration flights of up to one minute, indoors! Concepts of aerodynamic
efficiency, weight management, energy management, and the effects of torque are
discovered enthusiastically by your students.| $4.70 |
Product Number mid52102 |
The
Easy Spin is a hands-on interactive teaching device that allows students to
better understand the relationships between pitch and lift. Easy Assembly -
nothing to cut or glue. Easy to Decorate - just use markers.
| $12.70 |
Product Number mid52202 |
Also
includes a history of the Wright Brothers - provided by the Wright Brothers
Aeroplane Company.. This helicopter was the ''The Wright Inspiration''. It was
given to the Wright Brothers when they were 8 and 12. The helicopter, and their
fascination with powered flight, held Wilbur and Orville's interest as they
continued on their journey into the invention of flight. The Wright Bat features
Rubber band powered. It assembles in minutes with no cutting or gluing.
| $20.20 |
Product Number mid54602 |
The
Rubber Racer features a simple rubber motor drive and variable traction ballast
for hours of hands-on discovery and racing fun! It's power is supplied by a
1/16'' Rubber Strip. Its robust design has our unique die-cut puzzle piece
construction that can be assembled in minutes using a hot glue gun.
| $250.00 (18% off) |
Product Number mid8670 |
| $21.70 |
Product Number mid86702 |
An
operating, scale model replica of The Jefferson Street Bridge located in Joliet,
Illinois. This is 1 of 4 Bascule bridges that cross the Des Plaines River.
Precision laser cut wood parts. Adjustable counter weight and roller platform.
Includes all hardware. Can be painted with acrylic paints. This kit is quick and
easy to build, while also teaching physics and engineering. Illustrated assembly
guide.
| $65.00 |
Product Number NSI02598 |
Build a real working AM/FM radio that requires no batteries or an electrical outlet! You'll generate your own electricity with a hand-crank! Electricity generated by the hand crank gets stored in a rechargeable battery pack. Pre-assembled circuit board
in the durable plastic radio shell. Tuner, volume control and power switch. Detailed assembly and operation guide. (1) Radio. Screwdriver. Suitable for Ages 8 &
up..| Product Number NSI02855 |
Build
a unique-looking, motorized robot bug. Transparent purple plastic body shell.
Pre-assembled PCB board. Different resisters assembled to the PCB board will
produce different speeds; 5 ohm - fast 15 ohm - medium 30 ohm - slow The bug's
eyes are light sensors. When light shines into the eyes the bug will begin to
operate. Move the light around to move the bug in different directions. Detailed
assembly and operation guide.
| $99.00 |
Product Number NSI18929 |
Build your own Roboarm Learn the basic principles of robotics Dual control sticks let you
manoeuvre in all directions Command the Robo-arm to grab, release, lift, lower, rotate wrist and pivot a full 360 degrees. One mechanical robot arm. One mechanical robot arm base. One communication station. Three screws. Detailed instructions. This is the Smithsonian Roboarm
Kit from . For Ages 8 and up.| $74.00 |
Product Number NSI18930 |
Build
your own motorized jet engine Learn the basic principles of jet engines and
flight You control the jet after it is built More than 50 parts to assemble. One
Smithsonian Jet Works kit.
| $74.00 |
Product Number NSI90805 |
This battery operated model engine has internal and external moving parts. Spark plugs fire, valves move, and pistons drive the crankshaft just as they would in a real engine. This is a model of a 4-cylinder engine. The engine also displays
lights and sounds. It's a screw-together model that's fun and easy to build. Your engine will display such parts as; timing wheel, water pump, fan belt,
carburettor, intake manifold, dip stick, drive module, rocker arm, crankshaft pulley,
etc.| $27.00 |
Product Number owimsk669 |
This kit is from the Jr. Science Series which is designed for the first time experimenters with little or no experience at all. Powered by a mini
solar cell, this crab will demonstrate alternative energy principles! All 8 legs move. High
density
plastic parts. Easy-to-assemble with no batteries and tools required!
Illustrated assembly guide. (| $20.00 |
Product Number owimsk670 |
This kit is from the Jr. Science Series which is designed for the first time experimenters with little or no experience at all. Solar powered jiggly
eyes, wiggly legs and swaying antennas! Simply shield its power source to make
this bug stop moving! Easy-to-assemble with no batteries and tools required!
This educational kit demonstrates alternative energy principles. Illustrated
assembly guide.
| $21.20 |
Product Number owimsk671 |
This
kit is from the Jr. Science Series which is designed for the first time
experimenters with little or no experience at all. Surprising speed powered from
the sun! Simply shield its power source and depress its brakes to bring it to a
stop. Easy-to-assemble with no batteries and tools required! This educational
kit demonstrates alternative energy principles. Illustrated assembly guide. (| $27.00 |
Product Number owimsk672 |
This kit is from the Jr. Science Series which is designed for the first time experimenters with little or no experience at all. Powered by a mini
solar cell, this frog will demonstrate alternative energy principles! Real leaping action. High
density
plastic parts. Easy-to-assemble with no batteries and tools required!
Illustrated assembly guide.
| $27.00 |
Product Number owimsk673 |
This kit is from the Jr. Science Series which is designed for the first time experimenters with little or no experience at all. Powered by a mini
solar cell, this worm will demonstrate alternative energy principles. Mechanical movements that simulate the movements of a real worm. High
density
plastic parts. Easy-to-assemble with no batteries and tools required!
Illustrated assembly guide.
| $30.20 |
Product Number owimsk674 |
*** New Item ***
| $30.20 |
Product Number owimsk675 |
*** New Item ***
| $34.20 |
Product Number owimsk676 |
*** New Item ***
| $27.00 |
Product Number owimsk677 |
*** New Item ***
| $34.20 |
Product Number owimsk678 |
*** New Item ***
| $180.00 | Product Number owiowi-007 |
This kit is an educational electronic kit. It's designed for experimenters with some experience in assembling kits with small parts Teaches the basic robotic
sensor and locomotion principles, testing your motor skills, as you build and control the arm. The
transparent
arm lets you observe the dynamics of gear mechanisms after assembly. Use the
5-switch, wired controller with corresponding lights to grab, release, lift,
lower, rotate wrist and pilot sideways.
| $45.00 |
Product Number owiowi-608 |
Designed
for experimenters with limited experience in assembling mechanical kits. Safe,
simple-to-use encapsulated mini-panel. Comprised of a number of photo voltaic
cells. Each cell is made from a slab of semiconductor crystal. When light shines
on the cell voltage is produced that can create an electrical current in a
circuit. 3 cells in a sleek, low-profile protective housing with mounting holes,
and positive and negative terminals with indicating symbols.
| $35.20 |
Product Number owiowi-6573 |
This
is designed for experimenters with little or no experience in assembling
mechanical kits. This kit teaches the basic principles of electricity, gear
mechanisms and demonstrates 2 different modes of propulsion. Multi-colored
plastic body parts. Easy to assemble and disassemble without the use of any
tools. Pre-soldered DC motor and light socket wires. The motor is compatible
with low current. Smooth pulley drive or power gear drive. Battery box and
on/off switch.
| $90.00 | Product Number owiowi-685 |
This kit will demonstrate the use of alternative energy. Build with or without the clear plastic, aerodynamic sports car body design. Independent parts so you can make you own solar object. The sun or any intense mobile light can power the solar battery. Steerable front axle. The two-way battery source allows for battery or solar power.
Multi-speed transmission.
Detailed assembly and operation guide.
| $72.20 |
Product Number owiowi-769k |
This kit is an educational electronic kit. It's designed for experimenters with limited experience in assembling mechanical kits. Un-assembled printed circuit board. 3 wheels driven by a DC motor and ratchet mechanism. RocKit
Robot is an intelligent robot with a touch/sound sensor. If it comes in contact
with an object, or hears a loud noise (such as hands clapping), it'll
automatically reverse, then turn left before embarking on a new course. Detailed
assembly| $31.50 |
Product Number owiowi-8606 |
This
is designed for experimenters with little or no experience in assembling
mechanical kits. This kit teaches the basic principles of electricity, and gear
mechanisms. Multi-colored plastic body parts. Easy to assemble and disassemble
without the use of any tools. Pre-soldered DC motor and light socket wires.
Turbo 3000 can run on 1 battery, but 2 batteries will make it run faster!
Independent front suspension. 3 modes of propulsion; direct motor drive, air
propulsion,
| $120.00 (22% off) |
Product Number owiowi-8800 |
This is an infrared remote controlled robot with
caterpillar traction The infrared remote control handset has 8 channels, each
controls 4 motors; 2 motors control directional movement (forward, backward,
left and right). 1 motor regulates the elevating position of the claw. The 4th
motor operates the open and close dimension of the claw No soldering is required
Learn about; gear structure, battery wiring, motor principle, electronic
circuits and circuit block diagrams
| $58.00
|
Product Number owiowi-9870 |
This
is designed for experimenters with limited experience in assembling mechanical
kits. Built with durable transparent red plastic body parts, a pre-soldered
electronic circuit board and motor. This 2-in-1 robot is controlled by a
condenser microphone and printed circuit board. Jungle Robot has a built-in
sensor, which reacts to vibration from sound. It moves when it senses a high
pitched noise, such as a clap or a voice. The slide switch controls its forward
or backward
| $74.20 |
Product Number owiowi-9875 |
This is designed for experimenters with limited experience in assembling mechanical kits. Built with durable transparent yellow plastic body parts, a pre-soldered electronic circuit board and motor. The Binary Player Robot is divided into an electronic section and a mechanical section. Movement patterns are ''programmed'' on a paper disk. Equipped with 2
photo sensors, which are used to read the black and white ''codes'' on the
programmed disk.
| $65.00 |
Product Number owiowi-9910 |
This is designed for experimenters with limited experience in assembling mechanical kits. Built with durable transparent purple plastic body parts, a pre-soldered electronic circuit board and motor. Moves like a live animal via turning and stopping motors on its right and left sides. Equipped with a
photo sensor, which can be used to read and follow a black line. It'll change
direction if it runs into any obstacle. Adjustable three-speed gearbox. Vinyl
grooved tires.
| $23.50 |
Product Number owiowi351 |
*** New Item ***
| $23.50 |
Product Number owiowi352 |
*** New Item ***
| $23.50 |
Product Number owiowi353 |
*** New Item ***
| $23.50 |
Product Number owiowi354 |
*** New Item ***
| $100.00 |
Product Number owiowi535 |
*** New Item ***
| $38.00 |
Product Number ski74796 |
Runs
on potatoes, apples, soda pop and other common household items. This intriguing
item comes with a brightly colored display base, LCD clock with bi-metal probes
and complete instructions.| $31.70 |
Product Number tam70068 |
One Wall Hugging Mouse Assembly Kit. The Wall Hugging Mouse races along the wall in a zig-zag
manner. When the sensor rod makes contact with the wall it activates the circuit
switch which produces an alternating on/off sequence, turning one motor on while
turning the other motor off. The sensor and main switches come complete. This is
a fun and easy-to build kit.| $16.00 |
Product Number tam70084 |
| $36.20 |
Product Number tam70088 |
The
Walking Triceratops is a wonderful representation of the prehistoric herbivore.
With pre-cut wooden parts and pre-built gear box, this kit is easy to assemble
and a great way to view the workings of a crank-arm gear box. The special link
rod makes realistic movement of the legs, head and tail possible.
| $36.20 |
Product Number tam70089 |
This prehistoric giant is recreated in a fun and easy-to-build kit. The gear box is prebuilt. The combination of crank arm and link rod make the well-balanced walking motion possible, while also moving its head and tail. The body parts are made from pre-cut
wood with pre-drilled holes for flawless assembly.| $20.00 |
Product Number tam70092 |
Gracefully
flapping its wings, the Flying Seagull Display makes a great desk accessory
while also showing the interrelationship between the worm and spur gears. The
clear pipe allows the observation of the rod and wing flapping movements. The
body and wings come pre-painted. Assembly is easy, including the wiring process.| $12.70 |
Product Number tam70093 |
FA-130
motor and wiring cord. Three gear ratios are possible with this 3-Speed Crank
Axle Gear Box. Gear it for power or speed. Durability and reliability are
attained with high-quality gears
| $31.70 |
Product Number tam70094 |
The Walking Elephant lumbers along swaying its head back and forth. Powered by a FA-130 motor in a high quality gear box, this kit also comes with a high quality
plastic link rod to ensure smooth movement
| $7.00 |
Product Number tam70096 |
This
is a set of two durable, semi-pneumatic, Off-Road Tires with wheels that work
well in a variety of applications. The thick tread is good for off-road
conditions. No screws are necessary, just push them onto a shaft.
| $21.70 |
Product Number tam70097 |
Two
FA-130 motors are included. The Twin Motor Gear Box uses a two motor system to
provide power and speed to turn the hex shaft.
| $10.50 |
Product Number tam70098 |
1
universal plate. 2 shaft mounts. 2 angle brackets . 10 machine screw and nut
sets. Universal Plates can be used in a variety of projects including their use
as a base for a chassis. The 3mm holes are spaced 5mm apart.
| $16.00 |
Product Number tam70100 |
Allowing for a large degree of adjustability and creativity in design, the Track and Wheel Set offers three different lengths of tracks to choose from. Sprocket wheels, idler wheels, and road wheels have all been included. Use with a variety of Tamiya
Construction and Robotics
| $8.00 |
Product Number tam70101 |
This set of four truck tires with wheels. These work well in Tamiya Construction and Robotics projects. The hex shaft inserts directly into the wheel with no tools. This tire set installs directly onto many of
Tamiya's gearboxes| $21.70 |
Product Number tam70102 |
This 2-Channel Remote Control Box will control two separate motors, utilizing a self centering function that brings the control stick back to its original position when released. The basic wiring has already been completed. Simple assembly is all that is required. The wires are
colour
coded for easy wiring to motors. The battery case accepts either two AA or two C
size batteries depending on the desired power output and motors used.
| $16.00 |
Product Number tam70103 |
Motor;
FA-130 . The Universal Gear Box works well in a variety of applications and can
be mounted several ways. A hex shaft and a threaded shaft are included to give
the builder flexibility in design. The plastic gears and metal gear box are all
high quality.
| $55.00 |
Product Number tam70104 |
The Remote Controlled Bulldozer kit utilizes a pre-wired 2-channel remote system to enable forward/reverse and left/right movement. Powered by two FA-130 motors, this machine is sure to move mountains while teaching how a tracked vehicle works. The
bushings, bulldozer blade and arms are all made of a high quality plastic
material.
| $9.20 |
Product Number tam70105 |
Crank Arms; Two (2). Hex Shafts; Eight (8) (various lengths). Hex Wrench; One (1). The 3mm Diameter Shaft Set includes eight hex shafts of various lengths. Also included in the set are two adjustable crank arms with a hex wrench for tightening the crank
arm It also comes with a set
| $28.00 |
Product Number tam70106 |
Four
motors can be controlled with this 4-Channel Remote Control Box. The control
sticks have a self-centering function which automatically moves them back to the
neutral