| $400.00 |
Product Number ebm870850e |
| $2000.00 | Product Number futfutx1000 |
Fully assembled and controlled by 20 small servos, RPU-11 Processing Unit and RRC-T11 controller RPU-11 Processing Unit with rotary switch to change modes such as Edit Mode (to make and edit motions with ME) Automatic Mode (to play motion input
loaded automatically)
Operating Mode (to control robot with wireless controller) and much more
Tri-Axial Acceleration Sensor allows robot to distinguish posture to ground in
order to get up from falls and more 3D CG Motion Editor| $1900.00 | Product Number hrc77002 |
Pre-assembled humanoid robot can walk, run, do flips, cartwheels and dance moves and when programmed can compete in any Robo One Class ''J'' competition Robo Basic and Robo Script software offer easy programming Controlled with the IR Remocon device and 16 powerful HSR-8498HB digital servos (HRCX1050) built specifically for the ROBONOVA-I by Hitec,
servos feature set pin locking of the servo arms for easy assembly,
over-voltage current protection| $1700.00 | Product Number hrc77003 |
Humanoid robot can walk, run, do flips, cartwheels and dance moves and when programmed can compete in any Robo One Class ''J'' competition Assembles in 6-8 hours using only a screwdriver Robo Basic and Robo Script software offer easy programming Controlled with the IR Remocon device and 16 powerful HSR-8498HB digital servos (HRCX1050) built specifically for the ROBONOVA-I by Hitec, servos feature set pin locking of the servo arms for easy assembly, over-voltage current
protection.| $320.00 (13% off) |
Product Number rmx558353 |
Everything needed for a complete radio control robotic experience Assembles in under an hour with pre-assembled modules 2. 4GHz receiver module and
colour
video camera with sound allows operator to send live images and sound to their
TV and record them to a DVD recorder, 150ft (46m) range (TV & DVD recorder not
included) 6-channel transmitter with forward and reverse, left and right, arm
raising and lowering and claw grasping operation, 150ft (46m) range| $260.00 |
Product Number futfutx1100 |
Rotary
switch to change modes such as Edit Mode (to make and edit motions with ME)
Automatic Mode (to play motion inputted automatically) Operating Mode (to
control robot with wireless controller) and other functions. RPU-11 Processing
Unit with cable, small screwdriver and wiring harness.
| $80.00 |
Product Number futfutx1125 |
Controller is designed to turn off automatically if the controller is not in use for more than five minutes Vibration switch is located on the back of the transmitter One year limited warranty.
| $59.00 |
Product Number futfutx1130 |
Two
LED lights on the receiver. One indicates the status of communication and the
other on is red when there is power to the receiver. One year limited warranty.
| $18.00 |
Product Number hrc55020 |
Karbonite construction. Karbonite gears are four times stronger than conventional white resin gears making them less likely to strip under the loads that would usually break standard gears. Replacement ball bearings included. Karbonite
1st, 2nd, 3rd and final gears, two steel pins, white spacer.
| $18.00 |
Product Number hrc55420 |
| $7.20 |
Product Number hrc55719 |
Direct replacement items Nylon construction Steel horn screws. One 8498 HA-1 horn. One 8498 HA-2 horn. One 8498 HB-1 horn. One 8498 HB-2 horn. Eight 2x5mm screws. Two 2.6x7.5mm screws. This is a replacement Servo Horn and Horn Screw Set from HiTecfor
use with the HSR-8498HB robot servo.(25% off) |
Product Number hrc55811 |
Direct replacement cable 3-wire with J type connector with polarity tab Black in
colour.
| $14.50 |
Product Number hrc55814 |
Gold
colour metal construction For Hitec
robot servos. One Tapped U Type Universal Bracket.
| $10.70 |
Product Number hrc55815 |
Gold
colour
metal construction.
| $7.20 |
Product Number hrc55816 |
Gold
colour
metal construction.
| $10.70 |
Product Number hrc55817 |
| $10.70 |
Product Number hrc55818 |
| $430.00 |
Product Number hrc78000 |
| $370.00 |
Product Number hrc78001 |
| $150.00 |
Product Number futfutx1110 |
Designed
to be used only with lithium ion polymer battery (FUTX1115) One year limited
warranty.| $150.00 |
Product Number futfutx1115 |
| $25.50 |
Product Number futfutx1120 |
One
black interface cable Connects the robot's processing unit to the PC.
| $45.00 |
Product Number hrc54122 |
NiMH Chemistry 5-cell standard hump battery Green
Shrink-wrap
White Connector.
| $36.20 |
Product Number hrc77101 |
Specifically designed to allow Robonova programming from a PC. Serial Interface Cable with serial plug and straight jack. This is the Serial Interface Cable for the Hitec
Robonova-1 Robot HRCX1002| $7.20 |
Product Number hrc77102 |
| $75.00 |
Product Number hrc77103 |
Specifically designed to charge the 5-cell NiMH battery used in the Robonova. Quick Charger for the Hitec
Robonova-1 with wire lead and connector.